|More stable pressure
||The pressure fluctuation is smaller. The stability obvious at high pressure and low speed.
|Faster pressure and speed response
||The pressure and speed responsiveness improves, satisfying the quick response requirements of the quick hydraulic IMM.
|Higher injection molding product consistency
||The IS580 sees a rise in the qualified rate of the injection moudling products, especially the
quick injection molding products.
||The IS580 is over 40% smaller than the IS300 for the same power class.
|Wide voltage range design
||Rated voltage input: 380 to 480 V, wide voltage range: 323 to 528 V
|Built-in DC reactor
||The IS580 of 30 kW and above have built-in DC reactor.
|Built-in braking unit and related protective function
The power class of the IS580 with built-in braking unit extends to 75 kW (optional for the models of 90 kW above). The protective functions including braking resistor short-circuit, braking circuit overcurrent, brake pipe overload and brake pipe shoot-through.
|Longer serving life
||The bus capacitor has high disposition and long servicing life.
|Cooling fan drive circuit protection
||When short-circuit occurs on the cooling fan, the cooling fan drive circuit provides protection.
|Complete protective functions
||The whole series of IS580 drives have the protections on short-circuit to ground and pre- charge relay (contactor) close fault.
|Complete EMC solution
||Complete EMC solution (including optional EMI filter, common mode rejector / zero-phase reactor and simple filter) could be provided to satisfy the actual application and certification requirements.